Welcome to Arduino.TK

Americans have a habit of giving projects names, This Project is Called, Art

Art Thermostat
The Art of temperature controlled

Art a better NEST
Art is Smart
Start Art
Art OpenSource ESP32 Smart Thermostat

Art is TrustWorthy
Internet Safety, You can View & Control whats going on
Because Art is OpenSource

Thermostat via a Google server ???
Switching a light via a Chinese server ???


Hey Google!, Does a NEST Run on LAN Local Network Only?


Art's HardWare

ESP32 38-Pin              = +/- 3 U$ Dollar
SPI TFT Touch Display     = +/- 6 U$ Dollar
DS3231 RTC Module         = +/- 1 U$ Dollar
BME280 Module             = +/- 2 U$ Dollar
(Dual) Relais Module      = +/- 1 U$ Dollar

DownScale Control Relais Module / PCB, & Jo Less Energy?
GeekCreit, Keyes?, i want a Dual Miniature or SIP Reed relais module?
Or Dual optoisolated Triac / PhotoTriac PCB module (Will MOC3011, MOC3021, AQH3223 do switch 24~VAC?)
Maybe the AQH3223 IC solid state relais, is better, non zerro crosing, so maybe for AC/DC
With screwless terminal connectors for switch side 
For Switching 24VAC / 24VDC 

I CanNot Solder that Small
So i stick with modules
Modulair Cheap Easy Replaceable Repairable Environmentally Friendly ;-)

Art is now LIVE!!!
Art's Live Video Stream from old HTC One Mini Phone!!!

Some Say Do Not use spaces in WIFI Router Broadcasted SSID wifiname ;-(
Note: ESP32 only works at 2.4Ghz, my ZIGGO.NL wifi router has no Dual mode 2.4 / 5 Ghz option
Wi-Fi: 802.11 b/g/n/e/i (802.11n @ 2.4 GHz up to 150 Mbit/s)
IEEE 802.11 standard security features all supported, including WFA, WPA/WPA2 and WAPI

ESP32 Smart Thermostat
OpenSource Smart Thermostat

https://oshwlab.com/l.dijkman

https://github.com/ldijkman/ART-ESP32-Touch-TFT-Thermostat

Art's Facebook Group https://m.facebook.com/groups/2643123052617990

Art's Facebook Group https://www.facebook.com/groups/esp32smartthermostat

youtube.com/user/LuberthDijkman/videos

Wel ja joh, think big numbers ;-)
https://www.kickstarter.com/projects/art-thermostat/1894422548?ref=8ve321&token=c77a3051

BUY Art (Still, Just an idea)
All Parts and Soldered Prototype PCB, Ready To Start Art (UnProgrammed!)
AliExpress.com?Shop=Naomi_Wu&product=Art_Thermostat_kit
4 inch SPI Touch TFT, ESP32-38Pin, BME280, DS3231, Buzzer, 2RelaisPCB, ProtoType PCB.

Free printable Calender on this server
www.PRINT-it.TK Free Calendar

Sorry, the phone video recording didnt want to zoom in => next time better
Showed a wrong i2c BMP180 sensor , should be i2c BME280 sensor, E type does Humidity

After 20 seconds Art's BUTTons hide
and a barometer+linear scale and humidity+comfort scale apear (i2c BME280)
a Touch on Art's Bottom (screen),
will show the thermostat control buttons again

Art has an ip adres from Art's webserver
TFT screen tells the ip adres 192.168.178.27 in this case
hardcoded wifi settings = not so very not nice
better wifimanager first direct-connect with Phone to ESP32 to Easy Enter WiFiRouterName and PassWord
Art's Barometer say's Stormy, That is Bella.

Art Online
Art in WebBrowser, Art is in the Air
Webbrowser view of ip adres 192.168.178.27
not working as i would, only Temp val is updated properly
cannot figure out why yet
what's best to use AJAX, Jquery, XHTTP, i am lost
Help Me, Please?
facebook.com/Luberth.Dijkman
Art's Facebook Group https://m.facebook.com/groups/2643123052617990

it works i set different intervals for each field
but thats no good for the amount of data i want to diplay
Hellup?!
What is best to use
facebook.com/Luberth.Dijkman

<code>

// https://oshwlab.com/l.dijkman/esp32-dev-kit-38-pin-to-spi-touch-tft 
// https://github.com/ldijkman/ART-ESP32-Touch-TFT-Thermostat 
// http://www.Arduino.TK

// This function returns an HTML webpage
// It uses the Raw string macro 'R' to place commands in PROGMEM
const char Web_page[] PROGMEM = R"=====(
<!DOCTYPE html>
<html><head>
<title>Art, ESP32 Smart Thermostat</title>
<meta name=\"viewport" content="width=device-width, initial-scale=.7\">
<meta name=\"author" content="Remote HTML Web Control Art ESP32 Smart Thermostat\">
<meta name=\"copyright\" content=\"2020-2021 Dirk Luberth Dijkman Bangert 30 1619GJ The Netherlands\">
<meta name=\"description\" content=\"ESP32 Smart Thermostat\">
<meta name=\"keywords\" content=\"\">

<meta property=\"og:url\" content=\"http://www.Arduino.TK/\">

setInterval(function(){getSensorDataeen(); }, 2500); // Call function every set interval 
    setInterval(function(){getSensorDatatwee(); }, 2000);
    setInterval(function(){getSensorDatadrie(); }, 1500);
    setInterval(function(){getSensorDatavier(); }, 1000);

//document.getElementById("modeid").innerHTML = "Cool Mode"; 
      
       function getSensorDataeen() {
        var xa = new XMLHttpRequest();  
         xa.onreadystatechange = function() {
            if (xa.readyState == 4 && xa.status == 200) {
              document.getElementById("tempid").innerHTML = this.responseText;
            } 
          }
          xa.open("GET", "temp", true);
          xa.send();
       }

</head>
  <body>
     <div class = "displayobject">
     <center>
       <h1>Art ESP32 Smart Thermostat <br>
       Art in the Air<br>
       The Art of Temperature Controlled</h1>
       </center>
       <h4><a href="/temp">Temperature</a> <span id="tempid">-- </span> °C</h4>
       <h4><a href="/humid">Humidity</a> <span id="humidid">-- </span> %</h4>
       <h4><a href="/pressure">Pressure</a> <span id="pressid">-- </span> mbar</h4>
       <h4><a href="/mode">Mode</a> <span id="modeid">-- </span></h4>
       Active Mode = <input type="button" id="modeidtext" value="?" size="2" >=<input type="button" id="textmodeid" value="?"><br><br>

setInterval(function(){myFunction(); }, 1000);

function myFunction(val) { 
  //alert("The input value has changed. The new value is: " + val);

if(document.getElementById("modeidtext").value==0){
    document.getElementById("textmodeid").value="Normal Mode";
     document.getElementById("normalbtn").style="color:green; background-color:PaleTurquoise;";
    }else{
      document.getElementById("normalbtn").style="color:black; background-color:grey;";
  }
  if(document.getElementById("modeidtext").value==1){
    document.getElementById("textmodeid").value="Eco Mode";
     document.getElementById("ecobtn").style="color:green; background-color:PaleTurquoise;";
  }else{
      document.getElementById("ecobtn").style="color:black; background-color:grey;";
  }
  if(document.getElementById("modeidtext").value==2){
    document.getElementById("textmodeid").value="Auto Mode";
     document.getElementById("autobtn").style="color:green; background-color:PaleTurquoise;";
  }else{
      document.getElementById("autobtn").style="color:black; background-color:grey;";
  }
  if(document.getElementById("modeidtext").value==3){
    document.getElementById("textmodeid").value="Cool Mode";
     document.getElementById("coolbtn").style="color:green; background-color:PaleTurquoise;";
  }else{
      document.getElementById("coolbtn").style="color:black; background-color:grey;";
  }
}
</script>
       
       <button id="normalbtn" onclick="location.href='/mode0';" style="color:grey"><h3>Normal Mode</h3></button> 
       <button id="ecobtn" onclick="location.href='/mode1';" style="color:grey"><h3>Eco Mode</h3></button> 
       <button id="autobtn" onclick="location.href='/mode2';" style="color:grey"><h3>Auto Mode</h3></button> 
       <button id="coolbtn" onclick="location.href='/mode3';" style="color:grey"><h3>Cool Mode</h3></button>

<br>
       www.Arduino.TK
       <br>
       <br><br><br><br><br><br><br><br><br><br><br><br>
       </h1>
     </div>
  
  </body>
</html>
)=====";

void handleRoot() {
  //String s = Web_page;             //Display HTML contents
  server.send(200, "text/html", Web_page); //Send web page
}

void handleTEMP() { // This function is called by the script to update the sensor value, in this example random data!
  String temp = String(BME280.readTemperature(),2);
  server.send(200, "text/plain", temp);
}

void handleHUMID() { // This function is called by the script to update the sensor value, in this example random data!
  String humid = String(BME280.readHumidity(),2);
  server.send(200, "text/plain", humid); //Send sensor reading when there's a client ajax request
}

void handlePRESS() { // This function is called by the script to update the sensor value, in this example random data!
  String pressure = String(BME280.readPressure() / 100.0F,2);
  server.send(200, "text/plain", pressure); //Send sensor reading when there's a client ajax request
}

void handlemode() { // This function is called by the script to update the sensor value, in this example random data!
  String modevalue = String(mode);
  server.send(200, "text/plain", modevalue); //Send sensor reading when there's a client ajax request
}

void handlemode0() { // This function is called by the script to update the sensor value, in this example random data!
  mode=0;
   String modevalue = String(mode);
    server.send(200, "text/html", Web_page); //Send web page
  //server.send(200, "text/plain", modevalue); //Send sensor reading when there's a client ajax request
}

void handlemode1() { // This function is called by the script to update the sensor value, in this example random data!
  mode=1;
   String modevalue = String(mode);
   server.send(200, "text/html", Web_page); //Send web page
  //server.send(200, "text/plain", modevalue); //Send sensor reading when there's a client ajax request
}

void handlemode2() { // This function is called by the script to update the sensor value, in this example random data!
  mode=2;
   String modevalue = String(mode);
   server.send(200, "text/html", Web_page); //Send web page
  //server.send(200, "text/plain", modevalue); //Send sensor reading when there's a client ajax request
}

void handlemode3() { // This function is called by the script to update the sensor value, in this example random data!
  mode=3;
   String modevalue = String(mode);
   server.send(200, "text/html", Web_page); //Send web page
  //server.send(200, "text/plain", modevalue); //Send sensor reading when there's a client ajax request
}

</code>

Art's remote mode control with 4 buttons

Art's Memory Directory listing SPIFFS (SPI Flash File)
Memory test starts with "Arts Mem." button in second settings menu

Art's Memory Write Read variables to SPIFFS (SPI Flash File)

My Arduino IDE Settings for ESP32 38Pin dev kit

TFT_eSPI Grandioso, Superb Graphic Library
For SPI TFT Touch Displays

My TFT_eSPI User_Setup.h settings (in /home/pi/Arduino/libraries/TFT_eSPI/User_Setup.h

Does Arduino IDE has an option
to hide commented lines? = for easy viewing what is on

Shortened TFT_eSPI Graphic_Library User_Setup.h to match Art's Hardware ESP32 38Pin SPI Touch TFT Settings    
    
This  filelocation => /home/pi/Arduino/libraries/TFT_eSPI/User_Setup.h
Windows user_setup.h file location = I do not now (i use Linux Raspberry Pi 3, 4, 400)
Windows maybe
C:\programfiles\Arduino\libraries\TFT_eSPI\User_Setup.h  
or 
c:\documents\Arduino\libraries\TFT_eSPI\User_Setup.h
online original User_Setup.h file = https://github.com/Bodmer/TFT_eSPI/blob/master/User_Setup.h

//%%%%%%%%%%%%%%%%%
// define only one screen driver, the other ones must be commented out
//%%%%%%%%%%%%%%%%
// #define ILI9341_DRIVER     // My, Luberth tested ok, 2.8 inch & 3.2 inch SPI TFT display 320x240
// #define ILI9488_DRIVER     // My, Luberth tested ok, 3.5 inch SPI TFT display 480x320 will work, Future Big Art
#define ST7796_DRIVER         // My, Luberth tested ok, 4 inch SPI TFT display 480x320 will work, Future Big Art

// SPI section http://www.lcdwiki.com/Main_Page // has more info on SPI Displays

// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP32 SETUP   ######

//TFT LED could be +3.3Vdc or gpio pin?? for PWM backlight brightness control, see my code for used GpioPinName
#define TFT_MISO 19
#define TFT_MOSI 23
#define TFT_SCLK 18
#define TFT_CS   15  
#define TFT_DC    2 
#define TFT_RST   4 
/////////////////// #define TFT_RST  -1  // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST

#define TOUCH_CS 21     // Chip select pin (T_CS) of touch screen

#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
////// #define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts

#define SMOOTH_FONT

#define SPI_FREQUENCY  40000000

#define SPI_READ_FREQUENCY  20000000    // luberth i do not use read, i think

#define SPI_TOUCH_FREQUENCY  2000000

#define USE_HSPI_PORT                  //

some compiler info library versions i have used

some compiler info library versions i have used
  
  
  esptool.py v2.6
Multiple libraries were found for "TFT_eSPI.h"
 Used: /home/pi/Arduino/libraries/TFT_eSPI
 Not used: /home/pi/Arduino/libraries/TFT_eSPI-master
Multiple libraries were found for "WiFi.h"
 Used: /home/pi/.arduino15/packages/esp32/hardware/esp32/1.0.4/libraries/WiFi
 Not used: /home/pi/arduino-1.8.13/libraries/WiFi
 Not used: /home/pi/Arduino/libraries/WiFi
Using library WiFi at version 1.0 in folder: /home/pi/.arduino15/packages/esp32/hardware/esp32/1.0.4/libraries/WiFi 
Using library WebServer at version 1.0 in folder: /home/pi/.arduino15/packages/esp32/hardware/esp32/1.0.4/libraries/WebServer 
Using library NTPClient-master at version 3.2.0 in folder: /home/pi/Arduino/libraries/NTPClient-master 
Using library Time-master at version 1.6 in folder: /home/pi/Arduino/libraries/Time-master 
Using library FS at version 1.0 in folder: /home/pi/.arduino15/packages/esp32/hardware/esp32/1.0.4/libraries/FS 
Using library SPI at version 1.0 in folder: /home/pi/.arduino15/packages/esp32/hardware/esp32/1.0.4/libraries/SPI 
Using library TFT_eSPI at version 2.3.4 in folder: /home/pi/Arduino/libraries/TFT_eSPI 
Using library SPIFFS at version 1.0 in folder: /home/pi/.arduino15/packages/esp32/hardware/esp32/1.0.4/libraries/SPIFFS 
Using library Wire at version 1.0.1 in folder: /home/pi/.arduino15/packages/esp32/hardware/esp32/1.0.4/libraries/Wire 
Using library RTClib-master at version 1.12.4 in folder: /home/pi/Arduino/libraries/RTClib-master 
Using library Adafruit_Sensor-master at version 1.1.4 in folder: /home/pi/Arduino/libraries/Adafruit_Sensor-master 
Using library Adafruit_BME280_Library-master at version 2.1.2 in folder: /home/pi/Arduino/libraries/Adafruit_BME280_Library-master 
/home/pi/.arduino15/packages/esp32/tools/xtensa-esp32-elf-gcc/1.22.0-80-g6c4433a-5.2.0/bin/xtensa-esp32-elf-size -A /tmp/arduino_build_961368/ART-ESP32-Touch-TFT-Thermostat-main.ino.elf
Sketch uses 911046 bytes (69%) of program storage space. Maximum is 1310720 bytes.
Global variables use 41944 bytes (12%) of dynamic memory, leaving 285736 bytes for local variables. Maximum is 327680 bytes.
python /home/pi/.arduino15/packages/esp32/tools/esptool_py/2.6.1/esptool.py --chip esp32 --port /dev/ttyUSB1 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0xe000 /home/pi/.arduino15/packages/esp32/hardware/esp32/1.0.4/tools/partitions/boot_app0.bin 0x1000 /home/pi/.arduino15/packages/esp32/hardware/esp32/1.0.4/tools/sdk/bin/bootloader_qio_80m.bin 0x10000 /tmp/arduino_build_961368/ART-ESP32-Touch-TFT-Thermostat-main.ino.bin 0x8000 /tmp/arduino_build_961368/ART-ESP32-Touch-TFT-Thermostat-main.ino.partitions.bin 
esptool.py v2.6

petalbot-114-119-158-38.aspiege
Why does Huawei PetalBot Aspiegel Bot scan the FREE world internet
if the Chinese cannot view the FREE western internet?
ok they have a search engine 4 us
https://petalsearch.com/search?query=sticker.tk







Art Live, Old HTC One Mini Phone Video Server 
AnDroid app IP Webcam Pro by Pavel Khlebovich

https://www.google.com/search?q=android+app+IP+Webcam+Pro+by+Pavel+Khlebovich





OK Google Say it, Art is  ....... 

   

   


   State of Art

   WikiPedia

   The state of the art (sometimes cutting edge or leading edge)

   refers to the highest level of general development,

   as of a device, technique, or scientific field achieved at a particular time.

   

   Tought's

   The ESP32 is Dual Core, am i using only 1 core?

   can i run the webserver on the other core, to make it more responsive

   does the other core know the same variables

   the size and speed is allready impressive compared to the Uno, Nano, Mega

   Espressif is impressive !

   

   2 much for a Lutjebroeker CauliFlower Farmer Programmer, like me

   

   https://randomnerdtutorials.com/esp32-dual-core-arduino-ide/
   

   

   2 much Espressif

   https://www.espressif.com/en/support/documents/technical-documents

   

   

   With ESP32 it is possible to update program from wifi html web page

   UpDate Art's software program over wifi (not now)

   but should be possible

   

   Watch the dog, Feed the dog, is the WatchDog timer, standard actived?

   



a Chart for Art

Help Art, Google history Graphs, for temp, bar, humid, would be nice?!

https://developers.google.com/chart



maybe an example https://github.com/nhatuan84/esp32-webserver-dht11-led-googlechart









https://randomnerdtutorials.com/esp32-esp8266-plot-chart-web-server/






https://randomnerdtutorials.com/esp32-esp8266-plot-chart-web-server/



Art's Facebook Group https://m.facebook.com/groups/2643123052617990 



Code Part of Art, OpenSource Smart Thermostat
https://github.com/ldijkman/ART-ESP32-Touch-TFT-Thermostat


PCB EasyEDA JLCPCB Part of Art, OpenHardware ProtoType PCB Smart Thermostat
https://oshwlab.com/l.dijkman/esp32-dev-kit-38-pin-to-spi-touch-tft



Trying to Design a new PCB,Online inBrowser EasyEDA

Try it Now, Yourself, and be Amazed by EasyEDA online inbrowser PCB Designer



Try it Now, Yourself, and be Amazed by EasyEDA online inbrowser PCB Designer

Just A Click to JLCPCB order == Perfect PCB's in NoTime
   

  

  

  

  Start ART

  www.Arduino.TK

   Made in Holland 

  
  CopyRight 2020-2021 Dirk Luberth Dijkman

  Bangert 30 1619GJ Andijk, The Netherlands

  
  

  Google Does NOT want to support Art with ads nonsense
 Do you wanna Support Art?

a penny for sharing thoughts

a penny to keep Art alive and this page ads free
 
   

   

   facebook.com/Luberth.Dijkman

   

   







a bit of the time code idee comes from a 2010 javascript (wasted many hours on it)
online internet alarmclock
a lot is not working anymore (radiostations not)
like the countdown till next alarm
inspiration came from (dailyalarms.com no longer online)
G6EJD
 thats where the 1440 minutes came from 11 years ago



DailyAlarmClock.Com no longer online
 trying to dig it up
YaBaDaBaDoo




my version http://arduino.tk/alarm/

video youtube dated 14 march 2010









Keyes?! i want dual mini, micro, miniature relays PCB module, SIP Relays, Keyes dual reed relais module?
Why Not https://www.google.com/search?q=arduino+reed+relay+board






ReUse that old Arduino UNO / Mega Touch TFT Shield

it is possible to re use that old parallel tft shield

ILI9341 + ESP32 (Parallel) at blazing speeds

https://github.com/ldijkman/ART-ESP32-Touch-TFT-Thermostat/tree/main/Arduino_UNO_TFT_Shield_8-Bit_Parallel


https://www.pangodream.es/ili9341-esp32-parallel


    8-bit parallel 3.5 TFT LCD Shield + ESP32 -TouchScreen issue #448                        https://github.com/Bodmer/TFT_eSPI/issues/448

    
    8-bit parallel 3.5" TFT LCD ILI9486 does not work #539                                   https://github.com/Bodmer/TFT_eSPI/issues/539

    


https://www.pangodream.es/ili9341-esp32-parallel




https://www.pangodream.es/ili9341-esp32-parallel


Previet, Spassiba  Андрей Ушаков



https://github.com/ldijkman/ART-ESP32-Touch-TFT-Thermostat/tree/main/Arduino_UNO_TFT_Shield_8-Bit_Parallel





moonPhase cq weather display
hee Bodmer again = DarkSkyWeather

maybe ad a moon picto icon to main screen

maybe add a weather page to Art  Thermostat

https://github.com/Bodmer/DarkSkyWeather




https://github.com/Bodmer/DarkSkyWeather









Art's Facebook Group

https://m.facebook.com/groups/2643123052617990 

www.facebook.com/groups/esp32smartthermostat/




Page Made with Geany and Kate Plain text editors
Krusader, Kate is also nice



Need 4 Heat

Free my cheap Chinese Friend Jack Ma Yun!

Page Generated in 0.0115 Seconds.

Fry my pi



Personal Page, Where is Art, Find Art on my network

image to progmem
https://rawgit.com/lorol/esp8266-weather-station-color/master/resources/converter-tool/display.htm

Free
Calendar

My
Forum

3D-Print
Calendar Hanger

Support Art
OpenSource Smart Thermostat

Art's
Facebook Group
ESP32 Smart Thermostat OpenSource

BIG
Thanks to
Raspberry pi . org

Cheap
Anet A8 Plus
3D Printer

Art's Lab

Welcome to Arduino.TK

Art Thermostat
The Art of temperature controlled

Art is now LIVE!!!
Art's Live Video Stream from old HTC One Mini Phone!!!

[ Reload IP WebCam Video IFRAME ]

[ Reload ESP32 Control IFRAME ]

youtube.com/user/LuberthDijkman/videos

BUY Art (Still, Just an idea)
All Parts and Soldered Prototype PCB, Ready To Start Art (UnProgrammed!)
AliExpress.com?Shop=Naomi_Wu&product=Art_Thermostat_kit
4 inch SPI Touch TFT, ESP32-38Pin, BME280, DS3231, Buzzer, 2RelaisPCB, ProtoType PCB.

TFT_eSPI Grandioso, Superb Graphic Library
For SPI TFT Touch Displays

G6EJD

DailyAlarmClock.Com no longer online
trying to dig it up
YaBaDaBaDoo

ReUse that old Arduino UNO / Mega Touch TFT Shield

moonPhase cq weather display hee Bodmer again = DarkSkyWeather

Free my cheap Chinese Friend Jack Ma Yun!

FreeCalendar

MyForum

3D-PrintCalendar Hanger

Support ArtOpenSource Smart Thermostat

Art'sFacebook GroupESP32 Smart Thermostat OpenSource

BIGThanks toRaspberry pi . org

CheapAnet A8 Plus3D Printer

Art's Lab

Welcome to Arduino.TK

Art ThermostatThe Art of temperature controlled

Art is now LIVE!!! Art's Live Video Stream from old HTC One Mini Phone!!!

[ Reload IP WebCam Video IFRAME ]

[ Reload ESP32 Control IFRAME ]

youtube.com/user/LuberthDijkman/videos

BUY Art (Still, Just an idea) All Parts and Soldered Prototype PCB, Ready To Start Art (UnProgrammed!) AliExpress.com?Shop=Naomi_Wu&product=Art_Thermostat_kit 4 inch SPI Touch TFT, ESP32-38Pin, BME280, DS3231, Buzzer, 2RelaisPCB, ProtoType PCB.

TFT_eSPI Grandioso, Superb Graphic LibraryFor SPI TFT Touch Displays

G6EJD

DailyAlarmClock.Com no longer online trying to dig it upYaBaDaBaDoo

ReUse that old Arduino UNO / Mega Touch TFT Shield

moonPhase cq weather display hee Bodmer again = DarkSkyWeather

Free my cheap Chinese Friend Jack Ma Yun!

Free
Calendar

My
Forum

3D-Print
Calendar Hanger

Support Art
OpenSource Smart Thermostat

Art's
Facebook Group
ESP32 Smart Thermostat OpenSource

BIG
Thanks to
Raspberry pi . org

Cheap
Anet A8 Plus
3D Printer

Art Thermostat
The Art of temperature controlled

Art is now LIVE!!!
Art's Live Video Stream from old HTC One Mini Phone!!!

BUY Art (Still, Just an idea)
All Parts and Soldered Prototype PCB, Ready To Start Art (UnProgrammed!)
AliExpress.com?Shop=Naomi_Wu&product=Art_Thermostat_kit
4 inch SPI Touch TFT, ESP32-38Pin, BME280, DS3231, Buzzer, 2RelaisPCB, ProtoType PCB.

TFT_eSPI Grandioso, Superb Graphic Library
For SPI TFT Touch Displays

DailyAlarmClock.Com no longer online
trying to dig it up
YaBaDaBaDoo